ABB TZIDC-110, Руководство по эксплуатации

Страница: 27 / 59

41/18-77 EN Electro-pneumatic positioner TZIDC-110 27
3.4.2 Setting the bus address
• Switch the positioner over from the remote level to the operating level: Press and
hold
MODE
and
ENTER
simultaneously until the countdown has run down from 3
to 0. Release
MODE
and
ENTER
.
• Switch the positioner over to the configuration level: Press and hold and simulta-
neously and then additionally briefly press and release
ENTER
once. Keep and
pressed until the countdown from 3 to 0 is finished (approx. 3 seconds) and only
then release them. Otherwise, the change-over to the configuration level will fail.
is displayed
• Press and hold
MODE
. Additionally press or until
is displayed
• Release
M
ODE
.
is displayed (factory setting)
• Press the or button to increment or decrement the bus address.
• Press and hold
ENTER
until the countdown has run down from 3 to 0. Then release
ENTER
. The new bus address is saved.
• Press and hold
MODE
. Additionally press or until
is displayed. Set the parameter to NV_SAVE by using or .
• Switch the positioner back to the operating level: Press and hold
ENTER
until the
countdown has run down from 3 to 0. Release
ENTER
.
• Return from the operating level to the remote level: Press and hold
MODE
and
ENTER
simultaneously until the countdown has run down from 3.0. Release
MODE
and
ENTER
.
conf
mA
%
C °
conf
mA
%
C °
conf
mA
%
C °
conf
mA
%
C °