Chapter 2
Tropos Routers Installation Guide, Models 6410 and 6420
26
Wood Brace Mounting
You can mount the pole bracket directly on a wood brace without using clamps, as shown in
.
FIGURE 7
Wood Brace Mounting Option
Mount the router on a wood pole
1.
Select a mounting location. You can attach the router to any wood brace.
2.
Attach the pole bracket to the wood brace with two 1/4-inch lag bolts that are at least 3 1/2
inches in length, making sure that the wood brace is level.
3.
Attach the mounting bracket of the router to the pole bracket with two 5/16-inch machine
screws (refer to
for the correct orientation):
— Insert one screw through the hole at the top of the mounting bracket to the hole at the top
of the pole bracket.
— Insert the other screw through the curved slot track in the mounting bracket to the hole in
the middle of the pole bracket just above the clamp slot.
4.
Level the mounting bracket by rotating the unit along the curved slot tracks. Tighten the
screws.
Wood
brace
1/4” lag bolt
3-1/2” minimum
