ABB Tropos 1410, Руководство по установке

Страница: 25 / 62

Chapter 2
Š
Tropos 1410 Installation Guide 25
Wood Brace Mounting
You can mount the pole bracket directly on a wood brace without using clamps, as shown in
Figure 8 .
Figure 8
Wood Brace Mounting Option
Mount the Tropos 1410 on a wood brace
1.
Select a mounting location. You can attach the Tropos 1410 to any wood brace.
2.
Attach the pole bracket to the wood brace with two 1/4-inch lag bolts that are at least 3 1/2
inches in length, making sure that the wood brace is level.
3. Attach the mounting bracket of the Tropos 1410 to the pole bracket with two 5/16-inch
machine screws (refer to
Figure 5 for the correct orientation):
— Insert one screw through the hole at the top of the mounting bracket to the hole at the top
of the pole bracket.
— Insert the other screw through the curved slot track in the mounting bracket to the hole in
the middle of the pole bracket just above the clamp slot.
4.
Level the mounting bracket by rotating the unit along the curved slot tracks. Tighten the
screws.
To continue installing the Tropos 1410, see “Connecting Power and Data Cables” on page 28.
Wood brace
1/4" lag bolt
3-1/2" minimum