iii
Introduction
The following manual describes the Liquid Orifice measurement application for
Totalflow XSeries and microFLO devices. The manual will cover the initial setup and
testing of the application as it applies to certain Totalflow devices.
Organization & Style
Each of the chapters in this manual presents information in an organized and concise
manner. Readers are able to look at the headings and get a broad picture of the
content without reading every word.
Getting Help
Totalflow takes pride in the on going support provided to customers. When purchasing
a product, the user will receive documentation which should answer their questions;
however, Totalflow Technical Support provides an 800 number as an added source of
information.
If requiring assistance, call:
USA: (800) 442-3097
International: 001-918-338-4888
Before Calling
•
Know the Totalflow’s model and serial number. Serial numbers can be
found on a plate located on each unit.
•
Be prepared to give the customer service representative a detailed
description of the problem.
•
Note any alarms or messages as they appear.
•
Prepare a written description of problem.
•
Know your software version, board and optional part numbers.
Key Symbols
The following symbols are used frequently in the manual. These are intended to catch
the eye and draw attention to important information.
Intended to draw attention to useful information or to clarify a
statement made earlier.
Intended to draw attention to a fact that may be useful or helpful
in understanding a concept.
Intended to draw attention to a statement that might keep the
user from making a mistake, keep the user from destroying
equipment or parts or keep the user from creating a situation that
could cause personal injury if caution is not used. Please refer to
the “Safety Practices and Precaution” section for additional
information.
Intended to draw attention to a statement regarding the likelihood
of personal injury or fatality that could result from improper
access or techniques used while working in hazardous locations.
Please refer to the “Safety Practices and Precaution” section for
additional information.
