40
ABB i-bus
®
EIB / KNX
7.4
Explanations
for the configuration
of the commissioning PC
The following section describes the steps for configuring the IP address of
the commissioning PC. The settings differ depending on the operating sys-
tem (WIN 98, WIN2000, WIN XP,..). The explanations have been created with
the WINDOWS 98 operating system.
The IP (Internet Protocol) address is the unique identifier for a device in a
network (similar to a house number).
You can set this address in the control panel of the operating system (Start/
Settings/Control panel). Then click on the ‘Network’ icon (double click).
The following window appears:
Select the TCP/IP components from the list of network components and
click on ‘Properties’.
Anhang
