ABB TCC300, Быстрый старт

Страница: 3 / 12

3
24-Pin Connector (P2)
Voltage Input (Polarity)
Neutral
Load Current (Return)
Load Current (Polarity)
Circulating Current (Polarity)
Circulating Current (Return)
Tapchanger Raise Output
Motor Power Input
Voltage Reduction Step #2 or
Contact KeepTrack 1R1L/1N Input
Contact "Wetting"
12 Vdc
Operations Counter/
Switch Status Input #1
Operations Counter/
Switch Status Input #2
Input 1 Motor Seal-in/
Switch Status
Neutral Position Detector #1
Neutral Position Detector #2
Tapchanger Lower Output
Non-Sequential Operation/Auto
Tap Inhibit Input/SCADA Cutout
Voltage Reduction Step #1 or
Contact KeepTrack 1R1L/1N Input
Motor Seal-in Disconnect Output
User-Programmable Alarm
Self-Test Alarm
User-Programmable Alarm
Non-Interruptable
Pwr Supply Input
Self-Test Alarm
P3
Source Voltage Input
Aux Output
Aux Input A1
Or DVAr2 Disable Input
Aux Input A2
Aux Input A3
1
2
3
4
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Fuse ¼ Amp
Voltage Input (Polarity)
Load Current (Return) See Note 2
Voltage Input (Return) See Note 2
Load Current (Polarity) 0.2 A
Circulating Current (Polarity) 0.2A
Circulating Current (Return)
Self-Test Alarm
(Return) See Note 4
User-Programmable
Alarm (Return)
Self-Test Alarm
(Input) See Note 4
User-Programmable
Alarm (Input)
Motor Seal-in
Note 3
AUTO
OFF
OFF
RAISE
LOWER
RAISE
LS
LOWER
LS
AL
INTERLOCK
AR
INTERLOCK
AUX LOWER (AL)
AUX RAISE (AR)
AL
A
R
MOTOR
FUSE 6
A
MOTOR POWER 120/240 V
See Note 1
R L
When an adapter panel is not used, automatic shorting of CT inputs is not provided by the
TCC300/M-2050; the customer must provide a mehod for shorting the CT‘s before the control is disconnected.
1. Motor voltage may be 120 or 240 V to neutral, or 240 phase to phase.
2. The customer is to provide an earth ground connection to the CT/VT‘s neutral connection, external to the control
3. To Motor Power Seal-in board.
4. If the TCC300 is configured for the SCAMP push button Auto/Manual Switch type, the Self-Test Alarm relay is NOT avai-
lable.
Typical TCC300 stand-alone