ABB SPA-ZC 400, Руководство по установке и пусконаладке

Страница: 49 / 122

49
In order to get automatic updating of the process objects, you
should add those data objects of interest to the dataset group.
Refer to Section 6.5. Using Dataset Editor.
6.10. Configuring report control blocks
Report control block (RCB) controls the spontaneous event reporting. A
client can modify report sending behavior by setting RCB attributes. RCB
attributes have suitable default values for the following ABB products:
COM 610 and MicroSCADA Pro IEC 61850 client. RCBs are located under
the logical device LD0 and logical node LLN0.
Report
Handler*
Event
Monitor*
Report
Control
event
controls controls
has association
Reports
Get, Set report
control attribute values
Subscribe for reporting
* local issue
Data
Set
DO
DO
DO
Data
Set
DO
DO
DO
DO
DO
DO
Real
Data
A060032
Fig. 6.10.-1 Reporting model
RCB's have the following properties. To edit the properties, right-click the
dataset and select
Properties
.
*
Buffered reporting
IEC 61850 buffers events also during the communication break.
*
Buffer Time
Default value for buffered reporting is 100 milliseconds (ms). With this
value, RCB waits 100 ms for other events after the first change before
sending the report.
*
Integrity Period
Default value for Integrity Period is 0 ms. If this attribute has value > 0
ms, SPA-ZC 400 sends a report with all data listed in linked data set with
this period. By default this feature is not enabled because it generates
unnecessary load to server and network.
*
Report ID
By default this attribute is empty and SPA-ZC 400 uses it for RCB MMS
address. If this string is left empty, a default report control block MMS
path name is used.
1MRS755347
Ethernet Adapter
SPA to IEC 61850 Gateway
Installation and Commissioning Manual
SPA-ZC 400