PROFIBUS DPV1 parameterization
48 - EN
Sensyflow FMT500-IG
CI/FMT500-IG-EN
10.1.2 Parameter changes
To save parameter changes, you need to perform 3 separate operations:
1.
Enter password (OPERATION MODE)
2.
Make changes to parameters in the menus
3.
Save
Changing text and values
The process will be illustrated on the basis of the PROFIBUS SLAVE ADDRESS. This input
mask can be found in the PARAMETER MENU and can be accessed from any display mode
using
and .
Entries
and
changes can only be made in the SPECIALIST or SERVICE
operation modes (see Section 10.1.1, "Operation modes").
►
NITROGEN
T: 27
°
C
Press 6 times.
►
PARAMETER MENU
Press.
Press 3 times.
►
DP SLAVE ADRESS
Press.
Press.
Press.
015
►
DP SLAVE ADRESS
To make the entry, use
,
(cursor position)
and
(to set the numerical value or required
character). To complete the entry process, the
cursor must be moved to the right of the input field
(16 characters in the example). Only when the
cursor is in this position will
change back
to
on the display, making it possible to
exit change mode by pressing
.
The display will revert to the PARAMETER MENU,
where you can make additional configuration
changes.
015
5,
kg/h
942
✳
+
>
<
+
