5.7 Off-Line Flanged Connection Remote Seal (S26MA, S26ME)
Available with ASME (S26MA) and EN (S26ME) flanged process connection, the Off-line model matches small process
connections. Recommended for clean process fluid measurements.
These elements are available with a flushing connection in the lower housing, selectable on request.
D
F
C
E
63.5 (2.5)
134 (5.3)
Ø110 (4.33)
30 (1.18)
FLUSHING CONNECTIONS (two 1/4 in. NPT-f)
A
B
Figure 21: Off-line flanged diaphragm seal
Size/Rating
Dimensions mm (in) for S26MA and S26ME
A (dia)
B (dia)
C (4 studs)
D (dia)
E (dia)
F
Length
Thread
1/2 in. ASME CL 150
110 (4.33)
60.5 (2.38)
39 (1.53)
1/2in – 13 UNC
35.1 (1.38)
15.8 (0.62)
1.6 (0.06)
1/2 in. ASME CL 300
110 (4.33)
66.5 (2.62)
39 (1.53)
1/2in – 13 UNC
35.1 (1.38)
15.8 (0.62)
1.6 (0.06)
1 in. ASME CL 150
110 (4.33)
79.4 (3.12)
39 (1.53)
1/2in – 13 UNC
50.8 (2)
26.7 (1.05)
1.6 (0.06)
1 in. ASME CL 300
124 (4.88)
88.9 (3.5)
51 (2)
5/8in – 11 UNC
50.8 (2)
26.7 (1.05)
1.6 (0.06)
1 1/2 in. ASME CL 150
127 (5)
98.4 (3.87)
39 (1.53)
1/2in – 13 UNC
73 (2.87)
41 (1.61)
1.6 (0.06)
1 1/2 in. ASME CL 300
155 (6.1)
114.3 (4.5)
57 (2.24)
3/4in – 10 UNC
73 (2.87)
41 (1.61)
1.6 (0.06)
DN 25 PN 16-40
115 (4.52)
85 (3.34)
42 (1.65)
M12
68 (2.67)
28.5 (1.12)
2 (0.08)
DN 40 PN 16-40
150 (5.9)
110 (4.33)
48 (1.89)
M16
88 (3.46)
43.1 (1.69)
3 (0.12)
Note.
This diaphragm seal features two flushing connections.
For any other detailed information regarding S26Mx seals such as pressure limits, vacuum service recommendations, process
temperature limits, bolts, gasket seat finishing, temperature effects and configuration, please refer to product datasheet.
22 OI/S26-EN Rev. B
| 2600T Series Pressure transmitters
