ABB RobotWare 6.02, Руководство по применению

Страница: 44 / 52

3.6 Weld
Overview
Tap the Weld tab to view or modify the weld parameters.
Note
The weld parameters can only be modified in manual or tune mode while the arc
is established.
Interface
xx1500000853
Description Button
The blue refresh button is used to return to the Weld Phase tab. Refresh
The green check button is used to confirm any changes made. Confirm
The red cancel button is used to cancel any changes made and re-
turn to the previous values. Cancel
Weld parameters
Note
The parameters are defined dynamically, so not all parameters will be present
for every Weld List No.
Description Parameter
The
welddata
parameters control the weld during the weld phase,
which is as long as the arc is established.
welddata
Continues on next page
44 Application manual - Miller Ethernet I/P Interface and Weld Editor
3HAC054885-001 Revision: -
© Copyright 2015 ABB. All rights reserved.
3 Weld Editor Interface
3.6 Weld