2.3.2.13
LD0.SSCBR1 Reset signals of CB condition monitoring
Table 73:
LD0.SSCBR1 Reset signals of CB condition monitoring
IEC 61850 name
SA name
Description
Type
LD0.SSCBR1
.RsAccAPwr.Oper.ctlVal
RST_IPOW
Reset accum. energy
On
.RsCBWear.Oper.ctlVal
RST_CB_WEAR
Reset CB life and op. counter
On
.RsSprChaTm.Oper.ctlVal
RST_SPR_T
Reset spring charge alarm
On
.RsTrvTm.Oper.ctlVal
RST_TRV_T
Reset travel time alarm
On
2.3.3
Analog inputs
Table 74:
Explanations of the analog input table columns
Column name
Description
IEC 61850
name
Original IED data object identification. Described in the IEC 61850 format as
Logical Device.Logical Node and thereafter .Data Object.Data Attribute. Logical
Node is the same as the application function block name.
SA name
The signal may have a defined label that is visible for example in ACT.
Description
Short description of the signal. See the application function block documentation
for more details.
Values
The value range of the original IEC 61850 data. Scaling is needed to convert
floating point data into DNP3 integer values.
S
Scaling type selected as default. Default “R” means ratio scaling. See the DNP
communication protocol manual for details.
Arg 1, 2, 3, 4
Scaling argument values as default. When ratio scaling is selected, the four
values correspond to min value in, max value in, min value out, and max value
out. See the DNP communication protocol manual for details.
2.3.3.1
CTRL.CBCSWI1 CB 4-pole (2 bit) position value
Table 75:
CTRL.CBCSWI1 CB 4-pole (2 bit) position value
IEC 61850 name
SA name
Description
Values
S Arg 1,2,3,4
CTRL.CBCSWI1
.Pos.stVal
POSITION
Intermediate=0; Off=1; On=2;
Bad=3
0…3
R
0,3,0,3
2.3.3.2
LD0.CMMXU1 Phase currents (1)
Table 76:
LD0.CMMXU1 Phase currents (1)
IEC 61850 name
SA name
Description
Values
S Arg 1,2,3,4
LD0.CMMXU1
Phase-to-ground current
.A.phsA.instCVal.mag
I_INST_A
-phsA magnitude
0.00..40.0 [xIn]
R
0,40,0,4000
.A.phsB.instCVal.mag
I_INST_B
-phsB magnitude
0.00..40.0 [xIn]
R
0,40,0,4000
.A.phsC.instCVal.mag
I_INST_C
-phsC magnitude
0.00..40.0 [xIn]
R
0,40,0,4000
Section 2
1MRS756880 C
DNP3 data mappings
32
REM615
Point List Manual
