ABB RELION REV615 Скачать руководство пользователя | Manualshive

Страница: 3 / 60

background image

1. Description

REV615 is a dedicated capacitor bank relay designed for the
protection, control, measurement and supervision of capacitor
banks used for compensation of reactive power in utility
substations and industrial power systems. REV615 can also be
used for protection of harmonic filter circuits, if the highest
significant harmonic component is the 11th. REV615 is a
member of ABB’s Relion

®

product family and part of its 615

protection and control product series. The 615 series relays are
characterized by their compactness and withdrawable-unit
design.

Re-engineered from the ground up, the 615 series has been
designed to unleash the full potential of the IEC 61850 standard
for communication and interoperability between substation
automation devices.

The relay provides main protection for single star, double star,
and H-bridge connected capacitor banks and harmonic filters
in distribution networks.

Depending on the chosen standard configuration, the relay is
adapted for the protection of H-bridge connected or double
star connected shunt capacitor banks. Once the standard
configuration relay has been given the application-specific
settings, it can directly be put into service.

The 615 series relays support a range of communication
protocols including IEC 61850 with Edition 2 support, process

bus according to IEC 61850-9-2 LE, IEC 60870-5-103,
Modbus

®

and DNP3. Profibus DPV1 communication protocol is

supported by using the protocol converter SPA-ZC 302.

2. Standard configurations

REV615 is available in two alternative standard configurations.
The standard signal configuration can be altered by means of
the signal matrix or the graphical application functionality of the
Protection and Control IED Manager PCM600. Further, the
application configuration functionality of PCM600 supports the
creation of multi-layer logic functions using various logical
elements, including timers and flip-flops. By combining
protection functions with logic function blocks, the relay
configuration can be adapted to user-specific application
requirements.

The relay is delivered from the factory with default connections
described in the functional diagrams for binary inputs, binary
outputs, function-to-function connections and alarm LEDs.
Some of the supported functions in REV615 must be added
with the Application Configuration tool to be available in the
Signal Matrix tool and in the relay. The positive measuring
direction of directional protection functions is towards the
outgoing feeder.

Capacitor Bank Protection and Control

1MRS757952 D

REV615

Product version: 5.0 FP1

Issued: 2018-12-20

Revision: D

ABB

3

«
1
2
3
4
5
...
»

Содержание RELION REV615





























































Отзывы:

Нет отзывов

Похожие инструкции для RELION REV615

Бренд: AJA Страницы: 12

Бренд: Luxul Страницы: 8

Бренд: XODO Страницы: 16

Бренд: A-Neutronics Страницы: 6

univers N UC21LH0

Бренд: hager Страницы: 9

Бренд: Panamax Страницы: 2

Powermax Series PM8-EX

Бренд: Panamax Страницы: 2

Бренд: NewMar Страницы: 7

Trunkguard FPS200

Бренд: Moore Industries Страницы: 7

Бренд: Multilink Страницы: 57

Бренд: Europa components Страницы: 5

Бренд: Cyber Power Страницы: 24

Бренд: Cyber Power Страницы: 35

Бренд: APT Страницы: 146

Бренд: APT Страницы: 161

Atlas Power AP-S15RTHR

Бренд: Atlas Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды