4.1.9.2
Editing string values
AMU0600416 v9
Unicode characters that are not found on the on-screen keyboard can be used
if the string is edited in PCM600. This string can be shown and edited on the
HMI but if a character that is not found on the on-screen keyboard is deleted it
cannot be retrieved using the HMI.
1.
Activate the setting mode and select a setting.
When editing string values, the cursor moves to the first character.
2.
Press
to open the editor.
An on-screen keyboard is shown on the HMI.
IEC15000062.vsdx
IEC15000062 V1 EN-US
Editing can be aborted at any time by pressing
or by using the Cancel button on the
on-screen keyboard.
3.
Press
or
to select the edited string and press
or
to move the cursor.
IEC15000063.vsdx
IEC15000063 V1 EN-US
4.
Edit the string using the on-screen keyboard.
5.
Select OK on the on-screen keyboard or press
while the string editing field is focused
to accept the entered string is accepted and the editing dialog is closed.
4.1.9.3
Editing enumerated values
AMU0600417 v6
1.
Activate the setting mode and select a setting.
When editing an enumerated value, the selected value is shown inverted.
2.
Press
or
to change the value of an active enumerated value.
One press changes the enumerated value by one step in the parameter specific order.
4.1.9.4
Changing time settings in LHMI
GUID-0EE1EA01-D75F-4F3E-825F-ACD59D5A160F v3
If there is a need to change the time setting in the LHMI (Main menu/Configuration/Time/
System time/SYSTEMTIME:1) the change will take affect immediately. To confirm the new
setting press
. To remove the change, press
.
Section 4
1MRK 500 125-UEN A
Using the HMI
24
Operation manual
