manualshive.com logo in svg

ABB Relion REG670, Руководство оператора

Поделиться
Скачать
ABB Relion REG670 Скачать руководство пользователя страница 61

9.3.6.4 

Underfrequency protection SAPTUF

Main menu/Settings/Setting Group N/Frequency protection/
Underfrequency(PTUF,81)/TUF

Displays available instances of SAPTUF with a number of settings per instance.
These include parameters like operation, base voltage, and start frequency. To
ensure the proper operation of the Underfrequency function the 

Operation

 setting

must be 

On

.

9.3.7 

Multipurpose protection

9.3.7.1 

Overview

Under Multipurpose protection there are several instances of General current and
voltage parameters. This function has current and voltage inputs. The parameters
available are based on the data from these inputs. Within each instance operation
for the included functions can be set to On or Off and a large number of parameters
can be set.

9.3.7.2 

General current and voltage protection CVGAPC

Main menu/Settings/Setting Group N/Multipurpose protection/
GeneralCurrentVoltage(GAPC)/GF

Displays available instances of CVGAPC with several settable parameters per
instance. These settings are available for the user defined functions configured with
the help of the Multipurpose protection function.

9.3.8 

Secondary system supervision

9.3.8.1 

Overview

Under Secondary circuit supervision there are settings for Current circuit
supervision and Fuse failure. There are five instances of Current circuit supervision
with parameters for minimum operation current, rated current and operation. There
are six instances of Fuse failure supervision parameters for setting rated current,
voltage, operation mode and several other parameters.

9.3.8.2 

Current circuit supervision CCSRDIF

Main menu/Settings/Setting group N/Secondary system supervision/
CurrentCircuitSupervision(RDIF,87)/CCS

Displays available instances of CCSRDIF with some settings per instance. There
are settings for operation, base current setting, blocking of function, and minimum
threshold for current differential.

1MRK 502 014-UEN C

Section 9

Read and change settings

55

Operator's manual

Содержание Relion REG670













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды