manualshive.com logo in svg

ABB Relion REG670, Руководство оператора

Поделиться
Скачать
ABB Relion REG670 Скачать руководство пользователя страница 60

Displays up to several settable parameters for characteristics and many related
parameters.

9.3.5.5 

Two step undervoltage protection UV2PTUV

Main menu/Settings/Setting Group N/Voltage protection/
UnderVoltage2Step(PTUV,27)/TUV

Displays available settable parameters. The operation mode, the operate voltage as
percentage of 

Ubase

 are examples of the settings available here.

9.3.5.6 

Voltage differential protection VDCPTOV

Main menu/Settings/Setting Group N/Voltage protection/VoltageDiff(PTOV,
60)/VDC

Includes settings for voltage difference and timers.

9.3.6 

Frequency protection

9.3.6.1 

Overview

For Frequency protection there are settings for Underfrequency, Overfrequency
and Rate of change of frequency. Each category has some instances of parameters.
All functions can be set On or Off and have a number of other settable parameters
such as rated voltage and time delay before tripping.

9.3.6.2 

Overfrequency protection SAPTOF

Main menu/Settings/Setting Group/Frequency protection/
OverFrequency(PTOF,81)/TOF

Displays available instances of SAPTOF with a number of settings per instance.
The settings are operation, start frequency, base voltage setting, internal blocking
level, operate time delay and reset time delay. For the Overfrequency function to
operate correctly the 

Operation

 setting must be 

On

.

9.3.6.3 

Rate-of-change frequency protection SAPFRC

Main menu/Settings/Setting Group N/Frequency protection/
RateOfChangeOfFrequency(PFRC,81)/RCF

Displays available instances of SAPFRC with some settings per instance. The
settings include parameters such as operation, base voltage setting, start frequency,
internal blocking level, time delay to trip and frequency restoration.

Section 9

1MRK 502 014-UEN C

Read and change settings

54

Operator's manual

Содержание Relion REG670













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды