The selected contrast value is stored in the non-volatile memory if you are logged in
and authorized to control the protection relay. After an auxiliary power failure, the
contrast is restored.
4.1.7
Changing the local HMI language
1.
Select
Main menu/Language
and press
.
2.
Change the language using
or
.
3.
Press
to confirm the selection.
4.
Commit the changes.
A071010 V2 EN
Figure 19:
Changing the LHMI language
To change the language using a shortcut, press
and
simultaneously anywhere in the menu.
4.1.8
Changing display symbols
Use the keypad to switch between the display symbols IEC 61850, IEC 60617 and
IEC-ANSI.
1.
Select
Main Menu/Configuration/HMI/FB naming convention
and press
.
2.
Change the display symbols with
or
.
3.
Press
to confirm the selection.
The protection relay has to be rebooted if the WHMI display symbols
are changed. With the LHMI, the change takes effect immediately.
Section 4
1MRS758754 B
Using the HMI
46
REC615 and RER615
Operation Manual