ABB RELION REB670, Руководство оператора

Страница: 86 / 116

11.6.8.1 Logical signal status report BINSTATREP
Main menu/Test/Function status/Monitoring/BinarySignalStatusReport/
BINSTATREP:x
Displays sets of output measurements with several outputs per set of measurements.
11.6.8.2 Disturbance report DRPRDRE
Test/Function status/Monitoring/DisturbanceReport(RDRE)
Displays data about disturbance reports. The disturbance report can be switched
off, a disturbance report that has been initiated is indicated by a boolean number, as
are completed reports and cleared reports. The parameter
MEM USED indicates
that more than 80% of the memory space available for disturbance report data has
been used and the need to clear the memory is pressing. The
Memory USED
parameter generates an integer value showing the actual amount of memory used
by the disturbance record repository. The maximum number of incoming analog
channels is 40 and their Trig status is indicated here. The
Fault number parameter
generates an integer indicating the number of faults recorded since the last clearing
of the memory.
11.6.8.3 Event counter CNTGGIO
Main menu/Test/Function status/Monitoring/EventCounter(GGIO)/
CNTGGIO:x
Display the output data of the CNTGGIO function.
11.6.8.4 Generic measured value MVGGIO
Main menu/Test/Function status/Monitoring/GenericMeasuredValue(GGIO)/
MVGGIO:x
Displays the analog output from the MVGGIO block. The value shown here
depends on the settings and the logical configuration of the preprocessing blocks.
The measurement displayed may be current, voltage, frequency, phase angle etc.
11.6.8.5 Global positioning system
Main menu/Test/Function status/Monitoring/GPS
Displays the number of satellites supplying positioning and timing data to the GPS
module.
11.6.8.6 IEC61850 generic communication I/O functions 16 inputs SP16GGIO
Section 11
1MRK505209-UEN E
Test the IED
80
Operator's manual