ABB Relion REB500, Руководство по протоколу связи

Страница: 27 / 34

1MRK 511 371-UEN
Section 3
IEC 60870-5-103
Communication Protocol Manual, IEC 60870-5-103 19
Distributed busbar protection REB500
Table 20 Group for displaying status information
Entry No. Group No. 66 (0x42) to
Group No. 69 (0x45) Group No. 70 (0x46) to
Group No. 73 (0x49)
0 (Heading) Single-point indications Double-point indications
1 Indication #1 Indication #1
2 Indication #2 Indication #2
… … …
255 Indication #255 Indication #255
Table 21 Used attributes of ASDU 10 for status information
COT CAA FUN
1 Spontaneous 0 / 1..60 REB500 CU / REB500 BU 254 Generic
With the exception of the header (entry 0), the current values of the entries are not
available on request. The response to the corresponding generic read command is
therefore COT 43 “invalid data response to generic read command”.
3.5.3 Entries for single-point indications
Table 22 Directory entry for GIN 0x4200 (header)
COD Data type Length Num
ber Value / Significance
<10> Description <1>
OS
8
ASCII
24 1 "Single-point indications”
<1> Current value <3> UI 1 1 Number of SPI defined in this group
Table 23 Directory entry for GIN 0x42 (xx)
COD Data type Length Num
ber Value / Significance
<10> Description <1> os8ascii 20 1 Event text defined by user
<1> Current value <23> data
structure
14 1 (Includes the following two definitions)
<9> Double
Point
Information
1 1
OFF (1) / ON (2)
<14> binary
time
7 1 Time stamp (CP56Time2a)
The following table gives an example of the ASDU 10 ‘Generic Data’ that is
transferred spontaneously for a single-point indication.