ABB Relion 630 Series, Руководство пользователя

Страница: 20 / 36

Attribute name DATA type Explanation M/O/E
NtwLodInhS ABB_v2_dMV Network load inhibit by system (Load
value that is inhibited from being shed
by the system)
E
NtwLodMm ABB_v2_dMV Network load mismatch (Total value of
non-sheddable loads)
E
NtwShbLod ABB_v2_dMV Network sheddable load (Total value
of sheddable loads (accumulated)
E
NtwMLodShd ABB_v2_dMV Network must load shed (Load value
that must be shed (at minimum) to
establish power balance)
E
NtwALodShd ABB_v2_dMV Network actual load shed (Load value
of the calculated shed priority)
E
NtwPwrDiff ABB_v2_dMV Network power difference (The
difference of load value between
actually shed and must be shed)
E
Status information
NtwSt
ABB_v1_dSPS Network status (Active /Inactive) E
LSBlkSt ABB_v1_dSPS s Load shedding block status E
SlwLSBlkSt ABB_v1_dSPS Slow load shedding block status E
NtwLSPrio ABB_v1_dINS Network actual shed priority (Priority
for load shedding calculated by the
function)
E
LSOpSt ABB_v1_dINS Fast/Slow/Manual load shed operate E
3.1.5 SNWARCLS
Table 8: SNWARCLS
Attribute name DATA type Explanation M/O/E
RCLS class
RCLS
Contingency load shedding related -
Subnetwork accumulated load
information M
Data
Common Logical Node Information
Mod
ABB_c_dINC Mode (Fast load shed function
Enable / Disable / Test command/
status)
M
Beh ABB_a_dINS Behaviour (Reflects the mode of the
function)
M
Health ABB_c_dINS Health M
NamPlt ABB_b_dLPL Name plate M
Measured value
ALodPrio1
ABB_v2_dMV Accumulated Load against Priority 1 E
ALodPrio2 ABB_v2_dMV Accumulated Load against Priority 2 E
ALodPrio3 ABB_v2_dMV Accumulated Load against Priority 3 E
Table continues on next page
Section 3
1MRS757261 C
Logical node extensions
14 PML630
Point List Manual