To navigate between the options, use
and
.
•
HMI menu paths are presented in bold.
Select
Main menu/Settings
.
•
LHMI messages are shown in Courier font.
To save the changes in non-volatile memory, select
Yes
and press
.
•
Parameter names are shown in italics.
The function can be enabled and disabled with the
Operation
setting.
•
The ^ character in front of an input or output signal name in the function block
symbol given for a function, indicates that the user can set an own signal name
in PCM600.
•
The * character after an input or output signal name in the function block
symbol given for a function, indicates that the signal must be connected to
another function block in the application configuration to achieve a valid
application configuration.
1.4.3
Functions, codes and symbols
Table 1:
Functions included in PML630
Functionality
IEC 61850
Control
Double point indication
DPGGIO
1)
Monitoring
Station battery supervision
SPVNZBAT
1)
Generic measured values
MVGGIO
1)
Single point indication
SPGGIO
1)
Power management
Critical circuit breaker
NCBDCSWI
Contingency based fast load shed
LSCACLS
Sheddable load trip
LSPTRC
Busbar with sheddable load
LDMMXU
Network power source
PWSMMXU
Subnetwork output
SNWRCLS
Disturbance recorder function
Disturbance recorder
DRRDRE
1)
Analog channels 1-10 (samples)
A1RADR
1)
Analog channel 11-20 (samples)
A2RADR
1)
Analog channel 21-30 (samples)
A3RADR
Analog channel 31-40 (calc. val.)
A4RADR
Binary channel 1-16
B1RBDR
Table continues on next page
Section 1
1MRS757261 C
Introduction
6
PML630
Point List Manual
