manualshive.com logo in svg

ABB REC 523, Техническое справочное руководство

Поделиться
Скачать
ABB REC 523 Скачать руководство пользователя страница 7

The information in this document is subject to change without notice and should not 
be construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for 
any errors that may appear in this document.

In no event shall ABB Oy be liable for direct, indirect, special, incidental or 
consequential damages of any nature or kind arising from the use of this document, 
nor shall  ABB Oy be liable for incidental or consequential damages arising from use 
of any software or hardware described in this document.

This document and parts thereof must not be reproduced or copied without written 
permission from ABB Oy, and the contents thereof must not be imparted to a third 
party nor used for any unauthorized purpose.

The software or hardware described in this document is furnished under a license and 
may be used, copied, or disclosed only in accordance with the terms of such license.

Copyright © 2007 ABB Oy 

 

All rights reserved.

1MRS750881-MUM

REC 523

7

Remote Monitoring and Control Unit

 

Technical Reference Manual

1. 

About this manual

1.1.

Copyrights

1.2.

Trademarks

ABB is a registered trademark of ABB Group.

 

All other brand or product names mentioned in this document may be trademarks or 
registered trademarks of their respective holders.

1.3.

Guarantee

Please inquire about the terms of guarantee from your nearest ABB representative.

1.4.

General

This manual provides a general technical description of the remote monitoring and 
control unit REC 523. This version of the Technical Reference Manual complies 
with REC 523 Release Q1/05. For information about the changes and additions 
included in this release compared to earlier releases, refer to Chapter 11. Revision 
history of REC 523.

For detailed information about the functions listed in Section 5.1. REC 523 
functions, refer to the version 2.2 or later of the CD-ROM Technical Descriptions of 
Functions for REF, REM and REC. See Section 1.8. Related documents.

Содержание REC 523































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды