manualshive.com logo in svg

ABB RD344, Оригинальное руководство пользователя

Поделиться
Скачать
ABB RD344 Скачать руководство пользователя страница 6

2TLC172213M0201, rev. B 

6 

www.abb.com/jokabsafety

2 

Preparations before installation

Check the manual and the parts of the door

Figure 2.1 - Tools that will be needed.

Check

• 

that the width and height of the supplied door match the actual opening (see section 1.2).

• 

when mounting the door in ABB JOKAB Safety’s Quick Guard system; that necessary parts of the fencing 

system are at hand.

• 

when mounting the door in other types of guarding or fixture; that it is of suitable strength and capable of rigidly 

supporting the door (see section 2.2)

• 

that all components (according to delivery note) are at hand and undamaged, see parts list section 4.1.

NB!

 When installing the door it is of vital importance that the frame columns are erected absolutely vertically and 

the top roll perfectly horizontal.

Warning! 

Read through the manual before mounting the door.

Warning! 

Electrical installations must be carried out by trained personnel only

Содержание RD344































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды