Safety
10 - EN
FEX300, FEX500
CI/FEX300/FEX500-EN
1.12 Returning devices
Use the original packaging or suitably secure shipping containers if you need to return the
device for repair or recalibration purposes. Fill out the return form (see the Appendix) and
include this with the device.
According to EC guidelines for hazardous materials, the owner of hazardous waste is
responsible for its disposal or must observe the following regulations for shipping purposes:
All devices delivered to ABB Automation Products GmbH must be free from any hazardous
materials (acids, alkalis, solvents, etc.).
Rinse out and neutralize hazardous materials from all hollow spaces such as between meter
tube and housing. For flowmeters larger than DN 400, the service screw (for draining
condensate fluid) at the lower point of the housing must be opened to dispose of hazardous
substances and to neutralize the coil and electrode chamber. These activities must be
confirmed in writing using the return form.
Please
Please contact Customer Center Service acc. to page 1 for nearest service location.
1.13 Disposal
This product is manufactured from materials that can be reused by specialist recycling
companies.
1.13.1 Information on WEEE Directive 2002/96/EC (Waste Electrical and Electronic Equipment)
This product is not subject to WEEE Directive 2002/96/EC or relevant national laws
(e.g., ElektroG in Germany).
The product must be disposed of at a specialist recycling facility. Do not use municipal garbage
collection points. According to the WEEE Directive 2002/96/EC, only products used in private
applications may be disposed of at municipal garbage facilities. Proper disposal prevents
negative effects on people and the environment, and supports the reuse of valuable raw
materials.
If it is not possible to dispose of old equipment properly, ABB Service can accept and dispose of
returns for a fee.
1.13.2 RoHS Directive 2002/95/EC
With the Electrical and Electronic Equipment Act (ElektroG) in Germany, the European
Directives 2002/96/EC (WEEE) and 2002/95/EC (RoHS) are translated into national law.
ElektroG defines the products that are subject to regulated collection and disposal or reuse in
the event of disposal or at the end of their service life. ElektroG also prohibits the marketing of
electrical and electronic equipment that contains certain amounts of lead, cadmium, mercury,
hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers
(PBDE) (also known as hazardous substances with restricted uses).
The products provided by ABB Automation Products GmbH do not fall within the current scope
of the directive on waste from electrical and electronic equipment according to ElektroG. If the
necessary components are available on the market at the right time, in the future these
substances will no longer be used in new product development.
Содержание ProcessMaster
Страница 2: ......
Страница 77: ...Appendix CI FEX300 FEX500 EN FEX300 FEX500 EN 75 ...
Страница 78: ...Notes 76 EN FEX300 FEX500 CI FEX300 FEX500 EN ...
Страница 79: ...Notes CI FEX300 FEX500 EN FEX300 FEX500 EN 77 ...
