ABB PowerValue 11 RT, Руководство пользователя

Страница: 37 / 45

36 PowerValue 11 RT 6-10kVA | User manual
5.3 Network management card
(Optional)
PowerValue 11 RT is equipped with an intelligent slot for
optional cards for remote management of the UPS through
internet/intranet. Either of the following accessories can be
installed in the intelligent slot:
•
SNMP Card
– SNMP, HTTP and monitoring capabilities
through a Web browser interface.
• AS400 Card – AS400 card for AS400 communication
protocol.
5.3.1 Installing a serial network management card
(optional)
Each UPS has a communication slot for an optional serial
network management (SNMP) card. After installing an SNMP
card, an environmental monitoring probe can be connected to
the UPS.
NOTE
THE UPS DOES NOT HAVE TO BE SHUTDOWN
BEFORE INSTALLING A COMMUNICATION CARD.
To install a network management card:
1. Remove the two screws that protect the communication
slot of the UPS.
2. Insert the SNMP card into the communication slot.
3. Screw the SNMP card onto the slot using the screws
removed in step 1.
Compatible SNMP cards: CS141 Basic, CS141 ModBus,
CS141 Advanced, WinPower
For more information on the SNMP Cards, see the SNMP
user’s manual. For more details about parameters available
when using an SNMP card with PowerValue 11 RT, see
Appendix A and B.
5.3.2 Monitoring Software
The UPS can be monitored using software. The software
provides a remote and safe shutdown for multi-client systems
in case of absence of power in the output of the UPS.
Instructions on how to install the software are provided with
the network management cards.
For more information, contact your local supplier.