ABB PositionMaster EDP300, Руководство пользователя

Страница: 37 / 52

PositionMaster EDP300 DIGITAL POSITIONER | CI/EDP300-EN REV. D 37
Moving to end positions after completion of automatic
adjustment
Process display
1. Use
to switch to the Operating Mode menu.
Operating mode
Auto Adjust
O Adaptive
O Control
O Manual SP
O Manual Sensor
Configuration
Back OK
2. Use
or to select the ‘Manual Sensor’ operating mode.
3.  Use and to move to the relevant end positions.
-45.0
Pos. Ang.
°
Check the end positions. The angle of rotation is displayed in
degrees.
Recommended range:
• between
− 30 to 30° for linear actuator
• between − 45 to 45° for rotary actuator
Moving to end positions with a new device
Process display
1. Use
and to move to the relevant end positions.
-45.0
Pos. Ang.
°
Check the end positions. The angle of rotation is displayed in
degrees.
Recommended range:
• between − 30 and 30° for linear actuator
• between − 45 and 45° for rotary actuator
Auto Adjust must then be performed.
See
Start automatic adjustment on page 40.