ABB OmniCore C30 Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 236

ABB OmniCore C30 Скачать руководство пользователя страница 78

5.6 Lead-through

What is lead-through?

The lead-through functionality is available for YuMi robots.

Using lead-through, you can grab the robot arm and move it manually to a desired
position, as an alternative to jogging.

Using lead-through

Use the following procedure to jog the robot using the lead-through functionality:

1 Enable lead-through in one of the following ways:

•

Press the thumb button on the FlexPendant.

•

On the start screen, tap

Jog

and in the

Jog

app, select the

Lead-through

menu.

•

In

Quick settings

, select the

Jog

tab.

Note

If the robot is in motors off state, it will automatically go to the motors on
state when the lead-through is enabled.

2 Gently pull the robot arm to the desired position.

The robot arm moves along the path.

Note

You can feel if an axis reaches its end position. Do not try to force the axis
beyond this position.

Note

If lead-through is enabled, it will be temporarily disabled during program execution
and jogging. This means that it is possible to combine lead-through, jogging,
and testing the RAPID program without having to disable the lead-through.

Note

When using lead-through, it is important that the load is correctly defined. If the
load is heavier than defined, the effect will be the same as if you are pulling the
robot arm downwards. If the load is lighter than the defined load, the effect will
be the same as if you are pulling the robot arm upwards.

Note

For Yumi robots with SafeMove, some different behaviors apply, see the product
manual for the robot.

78

Operating manual - OmniCore

3HAC065036-001 Revision: E

© Copyright 20192020 ABB. All rights reserved.

5 Jogging

5.6 Lead-through

«
...
76
77
78
79
80
...
»

Содержание OmniCore C30













































































































































































































































Отзывы:

Нет отзывов