Page 1
© 2021 ABB. All rights reserved.
Quick Start Guide
NES
-
Flex DIN with Integrated AC
NES
-
Flex DIN with Integrated AC is available as either a one
-
shelf or two
-
shelf power system. The system is
factory
-
configured with LVBD, Pulsar Plus controller, AC circuit breakers, and surge protection. Two shelf system
includes LVLD for 6 priority and 9 non
-
priority
NES48
-
19
-
4U
-
AC7
-
PS3
-
DIN15B250P
-
LVBD
-
ACSPD
Tools Required:
•
Torque wrench (0
-
40Nm)
•
Screw Drivers
-
Phillips and flat
•
Sockets
-
metric and inch
•
Wire cutters and strippers
•
Cable crimpers
Step 1
-
Mount System
Prepare the system for mounting to the frame.
1. Reposition mounting ears if required
-
may be moved back (up to
5”).
Torque to 2.8 Nm (25 in
-
lb)
-
Phillips screwdriver.
Mount the system to the frame.
1. Attach system to frame using minimum of eight screws (four per
side) #12
-
24 screws (provided).
Mounting Ears
Inter
-
Shelf Bracket
Rectifier Shelf
Step 2
-
Ground Chassis
Attach ground cable to rear of system.
Torque to 4 Nm (35 in
-
lb)
-
5/16” (8
mm) socket.
Notes:
1.
Lug landing is M5 on
5/8” (16
mm) centers (lug not provided)
2. 10 mm
2
(10 AWG) recommended
3. Some applications may rely on frame mounting screws
for chassis ground omitting the chassis ground cable
Chassis Ground
Quick Start Guide
