ABB MV3B1RN5CB, Инструкция по эксплуатации

Страница: 12 / 42

I.L. 40-386.12
1-5
1
marks of the Line potential device and selecting the “polarity mark” voltage with jumper P12.
That is, if the Line voltage is
V
AB
, set jumper P12 for the
V
a
position. Selection of the Bus voltage
reference described assumes phase rotation ABC. If the phase rotation is ACB, the Bus voltage
reference would be
V
b
. Synchronism voltage input reference to “Line” voltage and “Bus” voltage
can changed using the Synch Volt setting. For example, if the Synchronism Voltage input is from
what would be referred to as the “Bus”, the Synch Volt setting could be changed for correct LED,
LCD and targeting displays
The 120 volt, phase to phase synchronism voltage option (i. e. REL 301/302 style number, digit
6 is a T) corrects for the 30
o
phase shift difference between line to neutral protection voltage in-
put and line to line synchronism voltage input. Components have been added to hardwire the
phase shift compensation. Hence when viewing the
“Bus-Line Angle”
on the Man-Machine
Interface (MMI) display, synchronism is represented by 0
o
angular difference between Bus and
Line voltages, not -30
o
.
If voltage checking (
HBDL
or
HLDB
) is to used, either independently or with synchronism
checking, the setting of voltage threshold
“V Max”
is with reference to a 50-120 volts scale. In
other words if
“V Max”
(Live voltage) is desired to be 100 volts, set
“V Max”
to
“100 Volts”
. The
same is true for
“V Min” with a range
0-50 volts.
All other settings for operation of REL 301/302 reclosing are the same as the 70 Volt Synchro-
nism voltage relay.