ABB M22381-W, Быстрое руководство

Страница: 5 / 16

Q U I C K G U I D E 5
Video indoor station 7
Audio module on the video outdoor station
No. Description
1 a1 b1 = bus connector
2 a potential free contact, such as a doorbell pushbutton
3 Station
Set the address of the default outdoor station.
4
Address selector switch
All are used to set the indoor station address. Selector switch X10
sets tens digits, selector switch X1 sets units digits, Dip switches
X100 and X200 set hundreds digits.
5 Master/slave function switch
Only one indoor station in each apartment can be set as “Master”
(ON=Master).
6
Terminal resistor switch
In video installations or mixed audio and video installations, the
switch must be set as ‘RC on’ on the last device of the line (ON=RC
on).
7 Microphone
8 Dismantling switch
9 Micro SD card connector
10 Speaker
No. Description
1 Connector for camera module
2 Connector for device software update
3 Plug-in clamps(COM-NC-NO) for floating output, door opener (30
V AC/DC 1 A)
4 Plug-in clamps(Lock-GND) for door opener (18 V 4 A impulsive, 250
mA holding)
5 Plug-in clamps(DC-GND) for additional power supply
6 Plug-in clamps(a-b) for Bus connection
7 Connector for induction loop module
8 Connector for next module
9 Connector for exit pushbutton
10 Connector for sensor to check the door status
11 Rotary switch to set the address of OS (1-9)
12 Set feedback tone of push button: ON/OFF
13 Configure push button as single column or double columns (ON=
double columns; OFF= single column)
14 Configure function of 1st / 2nd push button
3->OFF, 4->OFF=call indoor station/call indoor station;
3->ON, 4->OFF=switch on lightings/call indoor station;
3->OFF, 4->ON=call guard unit / call indoor station;
3->ON, 4->ON=switch on lightings / call guard unit.
15 Adjust loudspeaker volume
16 Adjust door lock release time, 1-10 seconds
1 2
3 4 5 6 7 8 9 10
11
12
13
14
15
16
7
1
2
3
4
5
6
8
9
10