ABB M2231 SERIES, Руководство пользователя

Страница: 40 / 531

ABB-Welcome
|
— 39 —
Settings
Set addresses of the preferred outdoor stations and the address of the indoor station on
the jumper. (See Chapter 4.5, Adjusting the device.)
Three types of installation:
A. Surface-mounted
1) Mounted on the wall
1. Affix the bottom of the device to the wall.
2. Latch the upper part of the device onto the bottom. Place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp.
2) Mounted with flush-mounted box
1. Affix the bottom of the device to the existing flush-mounted box.
2. Latch the upper part of the device onto the bottom part. Place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp.