ABB M101, Руководство пользователя, Страница: 63 / 74

DATA MAPPING DE FAU LT DATA M AP
1TG C908004M0 201 55
9.2.6. Switching Commands
The following table details the commands that are required from the Master (DCS / PLC) to
be sent to the M10x-M in order to control the motor or feeder module.
Operation
Type Description Modbus
Command Remarks
Control Access
Remote control 0x2100 M10x-M is controlled
via DCS.
Bus-Local control 0x2104 DCS allows control via
local HMI.
Stop Stop, Open 0x0201 Stops the M10x-M,
Opens contactor K1 for
Contactor Feeder ap-
plication
Start
Start CW
Close (CF)
Open (Act) Start
Start Clockwise
Close for Contactor Feeder applica-
tion
Open for Actuator application 0x0202 Starts the M10x-M.
Close contactor K1
Start CCW
Close (Close) Start Counterclockwise
Close for Actuator Application 0x0203 Start the M10x-M
Counterclockwise.
Close contactor K2.
Reset Reset 0x1100 Reset of all trips
Table 28 Switching Commands sent from DCS to MNS Digital Gateway