ABB L240 Series, Руководство по эксплуатации продукта

Страница: 4 / 20

2
1 General description
2 Installation
of the software
2.1 Login
The software WIN-PC enables programming of the ABB Intrusion Alarm
Panel L240. A database manages the system and customer-specific
panel configurations.
The connection of the panel and the PC is implemented either via the
Interface Module L208/V24, where a free V24 interface (COM port) or
a connection to the LAN network is required. The IP Interface L240/IP
is required for this purpose.
Due to the complexity of the software, ABB cannot guarantee that the soft-
ware can operate on all hardware platforms and rejects all warranty claims
resulting from compatibility issues between hardware and software.
WIN-PC runs on the following operating systems:
• Windows 2000
• Windows XP
• Windows Vista (*)
(*) User Account Control (UAC) on Windows Vista must be deactivated.
Automatic installation starts as soon as the WIN-PC.msi file is run. In the
following, the installation program will guide you through the installation.
WIN-PC creates the “c:\Programs\ABB\Win-PC” folder on the PC with
all the required programs and configuration files.
At the initial software start, the license
number will be requested. Please enter:
“DOLN-5319-2187-1111-2222”,
then click on buttons “Apply” and “OK” .
Note:
Should the Borland Database Engine (BDE)
be missing, installation is aborted with the
following error message “error $2108”.
In this case, please install the BDE program
file, which can be found on the installation
CD, e.g. “bde511ge.exe”.
As soon as the software is started, you are requested to enter the
username and the password.
The default login password is:
Username:
“Supervisor”
Password: “558032”
Note:
The password can be changed later,
refer to chapter 5.8 “Administration-User”
for this purpose.
Software WIN-PC for Intrusion Alarm Panel L240