ABB L240 Series, Руководство по эксплуатации продукта

Страница: 11 / 20

9
Software WIN-PC for Intrusion Alarm Panel L240
• In Submenu “05=Panel-IP” the IP address of the network module
L240/IP is entered. The point between the numbers can be achieved
by pressing the arrow key “
앴
”.
Panel IP
192.168.3.3 Entry of the L240/IP IP address
Acknowledge the IP address with the “Return” button, then exit the
function “05=Panel IP” with the “ESC” button.
• In submenu “06=Panel Port” the port number used by WIN-PC can be
found. This is fixed and should not be changed.
Panel Port
6000
Exit the function “06=Panel Port” with the “ESC” button.
• In submenu “07=Gateway IP”, if the connection to the panel is via a
gateway, the Gateway IP address can be entered here (dependent on the
local Ethernet settings). If the panel is connected via a local network or
directly to the PC (crossover cable), the value “0” can be entered here.
Gateway IP
192.168.3.4 Entry of the gateway address
Acknowledge the gateway IP with the “Return” button, then exit
the function “07=Gateway IP” with the “ESC” button.
• In submenu “08=Subnet Mask” the range of devices that can be
contacted is defined. The setting must be compatible to the network
used.
Subnet Mask
255.255.255.0 Enter: 255.255.255.0
Acknowledge the Subnet Mask with the “Return” button, then exit
the function “08= Subnet Mask” with the “ESC” button.
• In submenu “09=GSR 1 S/N” a license number must be entered. For the
Intrusion Alarm Panel L240 entry of 00000000 (8 zeros) is necessary.
GSR 1 S/N
00000000 Enter 00000000 (8 zeros)
Acknowledge the license number with the “Return” button, then exit the
function “09=GSR 1 S/N” with the “ESC” button.
• Exit programming by repeated actuation of the “ESC” button until
“=Confirm Logoff” is displayed. After pressing the “Return” button,
the base display appears.