manualshive.com logo in svg

ABB IRC5 Compact, Руководство для стартапов

Поделиться
Скачать
ABB IRC5 Compact Скачать руководство пользователя страница 31

Chapter 11. Appendix A: Setting Up Forge/OS

Installing ForgeOS

Follow these steps to install Forge‍O and sign in to the Admin role. Installation takes about 30 minutes, depending on the 
resources of the IPC.

1. To install Forge‍O, follow these substeps. You need a Forge‍O installation UOB flash drive. Contact your READY 

Robotics distributor for an installation UOB drive.

Important:

Installing Forge‍O will erase all data on the target hard drive.

a. Connect a monitor, keyboard, and mouse to the IPC  where you want to install Forge‍O.

b. Plug the Forge‍O installation UOB flash drive into the IPC.

Tip:

If you need more UOB ports, use a UOB 3.0 hub.

c. Restart the IPC. While the IPC  is powering on, press the keyboard hotkey that takes you to the Boot Menu.

Tip:

The key that opens the Boot Menu depends on the IPC  model. The most common keys that do this 
are EOC, F10, F11, or F12. Refer to your computer's documentation for boot options.

d. From the boot options, select 

Install ForgeOS 

to boot from the installation UOB flash drive.

e. The installer may take several minutes to load. Wait until the installation wizard opens.

f. Oelect your language. Then click 

Install Forge

.

Содержание IRC5 Compact













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды