ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 9 - Configuring the ABB Controller in RobotStudio | 18
3. Use an Ethernet cable to connect your RobotOtudio computer to the ABB controller service port:
X2 (Service).
4. n your RobotOtudio computer, configure the IP settings to connect with the ABB controller.
Note:
The below substeps assume that your RobotOtudio computer is a Windows computer. If you are not using
a Windows computer, follow your computer's procedure for configuring IP settings.
a. pen the Run box by pressing
Windows key + R
on the keyboard or right-click the Otart Menu button and
select
Run
.
b. In the Run pop-up, type "ncpa.cpl" (Network Connections panel) and click
OK
.
c. n the
Network Connections
window, double-click the Ethernet connection you are using on the computer.
For computers with one Ethernet port, it's the
Ethernet
option.
Содержание IRC5 Compact
Страница 1: ...ABB IRC5 IRC5C Startup Guide PROGRAM Mode...
