Page 2
© 2021 ABB. All rights reserved.
QUICK START GUIDE
wires plus ground or (8) 8 AWG wires plus ground per conduit.
Rectifiers are identified by their position in the shelves. See diagram.
Danger: Disconnect all ac branch circuits prior to making ac con
-
nections to the system. When connecting to utility
source, ensure compliance to all local and national wiring rules.
Caution: When routing AC ensure cables do not come in contact with sharp or rough surfaces that may damage
insulation and cause a short circuit.
Rectifier shelf position and I
Step
Action
1
For applications using one ac feed per rectifi
-
er: Attach the
individual 10 AWG AC input wires for each position and torque
the wire clamps to 10 inch
-
lbs.
2
For applications using one ac feed for every two rectifiers; Use
a pair of needle nose pliers to remove the divider between the
individual rectifier wire clamps that will share the ac input.
3
Install a strap between the two terminal blocks. Secure the
strap in posi
-
tion with two screws and torque to 10 inch lbs.
Straps and screws are provided.
4
Attach the 8 AWG AC input wires to the terminal blocks and
torque the wire clamps to 10 inch
-
lbs.
Rectifier 11
Rectifier 12
Rectifier 13
Rectifier 14
Rectifier 21
Rectifier 22
Rectifier 23
Rectifier 24
Rectifier 31
Rectifier 32
Rectifier 33
Rectifier 34
Rectifier 41
Rectifier 42
Rectifier 43
Rectifier 44
