ABB i-bus KNX IPS/S 3.5.1, Руководство по эксплуатации продукта

Страница: 12 / 30

ABB i-bus ® KNX
Device technology
12 9AKK107680A8655 EN Rev. A | IPS/S 3.5.1
KNX safety extra low voltage SELV 30 V DC
Temperature range Operation -5 °C…+45 °C
Storage -25 °C…+55 °C
Transport -25 °C…+70 °C
Ambient conditions Maximum air humidity 95%, no condensation allowed
Atmospheric pressure Atmosphere up to 2,000 m
Design Modular installation device (MDRC) Modular installation device, pro
M
Dimensions 90 x 36 x 63.5 mm (H x W x D)
Mounting width 2 x 18 mm modules
Mounting On 35 mm mounting rail To EN 60 715
Mounting position Any
Weight 0.1 kg
Housing, color Plastic, halogen free, gray
Approvals KNX to EN 50491 and EN 60 669-2-5
CE marking
In accordance with the EMC and Low
Voltage Directives
Device type Application Maximum number of
group objects
Maximum number of
group addresses
Maximum number of
assignments
IPS/S 3.5.1 IP Interface Secure/…* 0 0 0
* … = Current version number of the application. Please refer to the software information on our homepage.
Note
ETS (ETS 5 version 5.7.4 or higher) and the current version of the device application are required for
programming.
If the device is to be operated in KNX Secure mode, the commissioning key (FDSK; see chapter 3.5,
KNX Secure
) on the side of the unit will be required as well.
The latest version of the application and corresponding software information are available for download
from www.abb.com/knx. After import into ETS, the application is stored in the Catalogs window under
Manufacturers/ABB/System Infrastructure and Interfacing/IP Routers and Interfaces
.
The device does not support the locking function of a KNX device in ETS. If you use a BCU code to
disable access to all the project devices, it has no effect on this device. Data can still be read and
programmed.
Exception: When KNX Secure mode is activated, the device can be programmed only using the
existing project.