![background image](http://html1.mh-extra.com/html/abb/i-bus-knx-ipr-s-3-5-1/i-bus-knx-ipr-s-3-5-1_product-manual_3370378027.webp)
ABB i-bus
®
KNX
Commissioning
IPR/S 3.5.1 | 2CDC502099D0211 Rev. A 27
The following message appears if
Multicast
or
Unicast
is selected:
The device name, IP address and
tunneling servers are set in the
Properties window of ETS.
The following note also appears with the selection
Unicast
:
Attention! This setting switches off routing for the device. The IP telegrams will now be sent as
unicast to up to nine target addresses.
Unicast configuration is performed with the ABB i-bus
®
Tool.
See the description
Unicast communication
You can download the i-bus
®
Tool free of charge from our homepage (www.abb.com/knx).
No ETS or installation of Falcon is required for the i-bus
®
Tool.
System requirements: system with Windows 7 operating system (service pack 3) or later and .NET
Framework version 4.7.2 or later.
The integrated Falcon 5.0 supports only USB and IP interfaces (no RS232).
Note
A description of the functions is provided in the i-bus
®
Tool online help.
Important
Unicast communication cannot be used when KNX Secure mode is activated.
If KNX Secure mode is activated and the parameter
Type of IP communication
is set to
Unicast
,
multicast communication will be activated anyway.
A corresponding message will be displayed when the unicast addresses are parameterized via the
i-bus
®
Tool.
Содержание i-bus KNX IPR/S 3.5.1
