ABB i-bus
®
KNX
Commissioning
24 2CDC502099D0211 Rev. A | IPR/S 3.5.1
Group telegrams
main groups 14…31
Options:
Filter
Route
Block
This parameter defines whether the telegrams with group addresses of the main groups 14 ... 31 are
filtered, routed or blocked.
•
Filter:
The telegrams with the group addresses of the main groups 14 ... 31 from the KNX to the LAN
are filtered in accordance with the filter table, which is automatically calculated by the ETS.
•
Route:
All group telegrams of main groups 14 ... 31 are routed without considering the filter table
settings.
Important
This setting is useful only for commissioning and diagnostics. It should not be used during normal
operation.
As this setting can overload the KNX lines, a loss of telegrams could occur.
•
Block:
All group telegrams of main groups 14 ... 31 are blocked without considering the filter table
settings.
Physically addressed telegrams
Options:
Filter
Block
This parameter defines whether physically addressed telegrams are filtered or blocked.
•
Filter:
Only the telegrams from the KNX to the LAN that are to exit the line of the IPR/S to the LAN are
sent.
•
Block:
Physically addressed telegrams are not processed by the IPR/S. With this setting it is not
possible to send physically addressed telegrams from a line of a lower level than the IPR/S to another
line, e.g. during programming.
Broadcast telegrams
Options:
Route
Block
This parameter defines whether broadcast telegrams are routed or blocked.
•
Route:
Broadcast telegrams are routed.
•
Block:
Broadcast telegrams are not processed by the IPR/S. With this setting it is not possible to send
broadcast telegrams from a line of a lower level than the IPR/S to another line, e.g. during
programming.
Содержание i-bus KNX IPR/S 3.5.1
