ABB i-bus DALI-Gateway DG/S 8.1, Руководство по эксплуатации продукта

Страница: 14 / 75

12
ABB i-bus ® KNX Technical data and connection
2.1 Technical data
Table 1: DALI-Gateway DG/S 8.1, Technical data
Note: The DALI-Gateway conforms to the SELV properties in accordance
with DIN EN 410. DALI does not require SELV properties, and it is possible
to route the DALI control lines together with the mains voltage on a multi-
core cable.
Connection of 230 V mains voltage to one of the DALI outputs leads to the
destruction of the DALI end stage and the output.
Power supply – Operating voltage
– Total power consumption from the system
– Total current input from the system
– Total leakage loss from the device
– Current input via the KNX
– Power consumption via the KNX
85...265 V AC, 50/60 Hz
110 ... 240 V DC
max. 12.5 W, at 230V AC and max. load
max. 55 mA, at 230V AC and max. load
max. 6 W, at 230V AC and max. load
< 10 mA at 29 V DC
< 150 mW
DALI outputs (channels)
– Number
– Number of DALI devices
– Distance between gateway and
DALI device
Cable cross-section 0.5 mm 2
0.75 mm 2
1.0 mm 2
1.5 mm 2
8 independent channels
acc. to IEC 60929 / 62386
128 (max. 16 per output)
100 m
150 m
200 m
300 m
Connections – KNX
– DALI outputs and
– Mains voltage
– Tightening torque
Bus connection terminal,
0.8 mm Ø, single-core
Screw terminal
0.2... 2.5 mm 2 finely stranded
0.2... 4 mm 2 single core
max. 0.6 Nm
Operating and display elements – Test button
– Red LED and KNX button
– Green LED
– Yellow LED
For checking the DALI outputs
For assigning the physical address
For displaying readiness for operation
For displaying DALI fault, constant light
For displaying DALI fault, constant light
Type of protection – IP 20 In accordance with EN 60529
Protection class – II In accordance with EN 61140
Insulation category – Overvoltage category
– Degree of pollution
III in accordance with EN 60664-1
2 in accordance with EN 60664-1
KNX safety extra-low voltage – SELV 24 V DC
DALI voltage – typically 16 V DC (9.5...22.5 V DC) In accordance with IEC 60929 / 62386
Temperature range – Operation
– Storage
– Transport
– 5° C ... + 45° C
– 25° C ... + 55° C
– 25° C ... + 70° C
Design – DIN rail mounted device (MDRC)
– Dimensions
– Mounting width
– Mounting depth
Modular installation device, pro
M
90 x 108 x 64,5 mm (H x W x D)
6 modules at 18 mm
68 mm
Installation – on 35 mm mounting rail In accordance with EN 60 715
Mounting position – As required
Weight – 0.220 kg
Housing, colour – Plastic, grey
Certification – KNX in acc. with EN 50 090-1, -2 Certificate
CE mark – In accordance with the EMC and
low-voltage guidelines