ABB FPTC-01, Руководство пользователя

Страница: 56 / 108

Parameter settings 55
FSO module
If you use an FSO module with the FPTC-01 module, set and
check the FSO parameters listed in this section.
You need the Drive composer pro PC tool to set the FSO module
parameters, and a password to be able to download the
configuration to the FSO module from Drive composer pro. For the
default password of the FSO module, see the FSO module user’s
manual. For more information on the Drive composer pro PC tool,
see
Start-up and maintenance PC tool Drive composer user’s
manual (3AUA0000094606 [English]).
Follow the configuration steps described in the FSO module user’s
manual, chapter
Configuration .
There are parameters that you must set always to keep the
certificate valid
and parameters that are related only to certain
safety functions. This chapter lists the parameters that are relevant
to the L536+Q973 (with FSO-12) and +L536+Q972 (with
FSO-21).
You can use the FSO-21 module (+Q972) also with a safety pulse
encoder and the FSE-31 pulse encoder interface module (+L521).
In this case, set the parameters listed in section
FSE module and
safety pulse encoder parameters on page 62 .
The example values apply to ACS880 cabinet-built drives. One
FPTC module is connected to the FSO module with a two-channel
connection (digital inputs X113:4 and X114:4, see the example on
page
46 ).
Configure the FSO module so that it opens the drive STO circuit
immediately after the safety function request from the FPTC
module (stop category 0). With the FPTC module, you cannot use
a stop function with a deceleration ramp (stop category 1). The
FSO module always generates a fault and activates the drive STO
function immediately in overtemperature situations.