Changing the configuration
14
Thermal Mass Flowmeter FMT200-ECO2
42/14-41 EN
6 Changing the configuration
Changing the configuration means setting the parameters of the instrument, i.e. output signals and mea-
suring ranges. The configuration software is using the standard serial interface RS 232 of the PC and the
FTM200-ECO2 (Sensyflow eco 2). The service and configuration box (Order.Nr.:7962818) is a simple
tool for connecting FTM200-ECO2, PC and power supply.
System requirements
The configuration software is using Microsoft Windows 3.1 or higher and Windows 95/NT.
6.1 Installation of the configuration software
The Software will be supplied on three 3 ½" disks or on CD ROM. To install the software, start Microsoft
Windows 3.1 or higher. Insert the disk labeled: " ECO2 KONFIGURATION ... DISK 1/3"or the CD-ROM
and start the program SETUP.EXE. We are sorry that our installation routine is not in English. All instal-
lation screens will be displayed in German, but the configuration program itself is also available in English
and French.
If you see this message, please close all other programs:
Fig. 6-1
Other wise you will see this message:
Fig. 6-2
Verzeichnis = Directory
Click on the button „Verzeichnis wechseln“ to change the installation
directory
Setup beenden (Exit Setup) Click here to exit the installation
Click on the computer symbol to continue the installation.
