Sensyflow FMT200-ECO2
THERMAL MASS FLOWMETER | OI/FMT200-ECO2-EN REV. H
21
Parameter for the analog output
Parameter
Description
Analog output
Select the operating mode for the analog output:
0-20 mA, 4-20 mA, 0-5 V, 0-10 V
Upper range value
Set the flow rate for the maximum current / maximum voltage on the analog output.
Low flow
Set the flow rate below which no measurement is made (measured value = 0 %)
Filter factor
Set the time constant for the damping of the output signal in ms.
Output in the event of an error
Select the output behavior in the event of an error.
• Min: Analog output 0 %
• Max: Analog output 100 %
• Up: Analog output > 22.5 mA*
• Down: Analog output < 3.5 mA* **
* not for operating mode 0-5 V, 0-10 V
** not for operating mode 0-20 mA
