manualshive.com logo in svg

ABB ETL600, Инструкция по эксплуатации

Поделиться
Скачать
ABB ETL600 Скачать руководство пользователя страница 178

ABB Switzerland Ltd

 1KHW001489-EN 

 ETL600 

 

DANGER

 

The isolating terminals from the external cables 
must be kept open during installation, maintenance 
and before storage, decommissioning and disposal. 

 

DANGER

 

Faston plugs on the cables connected to the rack 
P7LA must be covered with an isolation sleeve. 
Unused faston connectors have to be covered. 

 

Work on the system 

 

DANGER

 

Do not work on the system or connect or disconnect 
cables during periods of lightning activities. 

 

Back cover 

 

DANGER

 

Hazardous voltages and/or hazardous energy level 
behind the back cover. Before removing the back 
cover, the isolating terminals of the external cables 
must be opened or the cables to the terminals must 
be disconnected. 

 

Unused slots 

 

DANGER

 

Unused slots in the equipment subracks must be 
covered with blanking plates. 

 

External cables 

 

DANGER

 

The shields of the external cables V9OD, V9OS and 
V9OF must be earthed at both cable ends using the 
shield clamps supplied with the cables. 

 

DANGER

 

Do not connect or disconnect energized cables to or 
from the equipment. 

 

Insertion and removal of plug-in modules 

 

Caution

 

Neither removing nor inserting of modules is 
permitted during power-up of the equipment. 
Preceding to plug in and out of modules the power 
supply of the equipment has to be switched OFF. 

 

6-2 

November 2005 

Assembly and Installation 

Содержание ETL600































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды