ABB ETL600, Инструкция по эксплуатации

Страница: 135 / 382

ETL600 1KHW001489-EN
ABB Switzerland Ltd
Baudrate:
57’600 Bd
Timeout:
10’000 seconds
Start the server program by pressing the button
Start server
. By
clicking the minimize button, the SVR600 application window
disappears and the icon
SVR
appears instead in one of the corners of
the screen. The colour of the icon changes depending on the status of
the SVR600 (stopped, not connected, connected, read/write).
4.4.4.2.2. Configuration of HMI600
In the dialog box
Options
/
Communications…
, select
Internet
connection
, specify the internet address of the server in the field
Server address
, which must be a number of the form n1.n2.n3.n4 with
0
≤
n1, n2, n3, n4
≤
255 or a host name, set the
Server Port
to 5111
(corresponding to the entry in SVR600) and set the
Timeout
to
10500ms or higher.
Optionally, by checking the box
Allowed clients
and clicking the
Add
button, a list of client internet addresses can be specified. If this is
done, the server will not process any messages it receives from the
intranet/internet unless they are generated by one of the clients in the
list. That way, unauthorized access to the ETL600 from unknown
clients is not possible.
Click
OK
to accept the settings.
4.4.4.3. Logon to the equipment
Refer to section 4.4.2.3. The Logon procedure is identical to the one
for direct connection via cable.
4.4.5. Connection via intranet/internet and phone modems
HMI600 can communicate with ETL600 via internet/intranet
and
phone
modems.
Substation
Dial up
modem
RS232
connection
RS232
connection
PSTN
(Public
Switched
Telephone
Network)
Internet,
Intranet,
LAN,
WAN
Main control center
Regional control center
Ethernet
connection
Ethernet
connection
Telephone
line
Telephone
line Dial up
modem
SVR600
HMI600
ETL600
Fig. 4-4 Communication via intranet/internet and phone modems
User Interface Program November 2005 4-9