ABB EL3000 Series, Руководство пользователя

Страница: 45 / 128

EL3000 CONTINUOUS GAS ANALYZERS | CI/EL3000-EN REV. B 45
Installing the gas connections
NOTES
We strongly recommend that you install the gas connections before the gas
analyzer is installed, since the gas ports are now easily accessible.
The fittings must be clean and free of residue! Contaminants can enter the
analyzer and damage it or lead to false measurement results!
Do not use sealing compound to seal the gas connections! Constituents of
the sealing compound can lead to false measurement results! Use PTFE
sealing tape!
Follow the manufacturer's installation instructions for the fittings!
Position and layout of the gas connections
Uras26 Model EL3020 (see page 47) Model EL3040 (see page 49)
Uras26 with Magnos206 Model EL3020 (see page 51) Model EL3040 (see page 53)
Uras26 with Magnos28 Model EL3020 (see page 55) Model EL3040 (see page 57)
Uras26 with Caldos27 Model EL3020 (see page 59) Model EL3040 (see page 61)
Limas23 Model EL3020 (see page 63) Model EL3040 (see page 64)
Limas23 with Magnos206 Model EL3020 (see page 65) Model EL3040 (see page 66)
Limas23 with Magnos28 Model EL3020 (see page 67) Model EL3040 (see page 68)
Magnos206 Model EL3020 (see page 69) Model EL3040 (see page 70)
Magnos28 Model EL3020 (see page 71) Model EL3040 (see page 72)
Magnos27 Model EL3020 (see page 73) –
Magnos27 with Uras26 Model EL3020 (see page 74) –
ZO23 Model EL3020 (see page 75) Model EL3040 (see page 76)
Caldos27 Model EL3020 (see page 77) Model EL3040 (see page 78)
Fidas24 Model EL3020 (see page 79) Model EL3040 (see page 80)
Requisite material
Screwed fittings with nozzles (supplied) or threaded connections with
⅛ NPT threads and PTFE sealing tape
Installing the gas connections
Screw out the yellow plastic screwing caps (5 mm hexagon socket) from the
connectors. Tightly wind two layers of PTFE sealing tape around the thread
of the screwed fittings or threaded connections in a clockwise direction and
screw into the gas ports. Approx. 2 threads usually remain visible after the
assembly.
NOTE
Screw in the fittings carefully and not too tightly!