ABB DCS800, Руководство по установке и запуску

Страница: 7 / 66

5
Introduction
3ADW000xxxR0101 DCS800-R Sel e a
Introduction
How to use this manual
The purpose of this manual is to provide you with the information
necessary to select the right rebuild kit with all the necessary or
available options, to install it, do the start-up and operate it as a DC
drive system. Depending on the kit's configuration, different func-
tionality and different options concerning the user interface are
available. As long as the hardware needs to be named or cross-
referenced to in a very general way, the term
Rebuild kit will be
used.
Contents of this manual
Introduction describes how to use this manual and the boundary
conditions applying.
Basic Selection provides the information about the types of the
Rebuild kits, their type designations and options.
Hardware description provides the information about the boards
and components
Interfacing the Electronics and Thyristors provides the informa-
tion about the configurations and functions of drives and examples
of the whole circuit diagram.
Installation provides the information about required ambient condi-
tions, space requirements, cabling and wiring and how to install a
rebuild system.
Start-up gives some general guidelines and cross references how
to commission and start up a DC drive system using a Rebuild kit.
Associated publications
Associated publications see inner page of the jacket of that manual.