Operation
ABB, 1SBC159103M0201
27
The operator terminal will determine the user level from the entered password.
For instance, if the level of the password entered by the user is
1
, then the oper-
ator terminal will set the user level to1; if the level of the password entered by
the user is
2
, then the operator terminal will set the user level to 2.
User level 1
has the highest privilege and
User level 9
has the lowest.
Scenario 2: Re-entering a password
The object
Action Button
in CP400Soft also allows the designer to create a but-
ton which asks the user to re-enter a password.
For example, by pressing the
button the password keypad will be displayed
to prompt the user to enter a password. After entering the password, the opera-
tor terminal will update the user level according to the most recent password
which has been entered. Therefore, this button can be applied to raise or drop
one’s privileges while the operator terminal is in operation.
How to configure an
Action Button
is described in the CP400Soft User’s
Manual.
Note:
Only users of
User Level 1
has the right of access to the password table.
MA00824B_MAEN859.book Page 27 Tuesday, June 5, 2007 10:34 AM
