ENG
44
3. Highlight the project in the project list and
press the "OK" button
4. The project is transferred from the
SD/MMC card into the room/control panel
and starts automatically.
5. The units exits the programming mode
automatically and the basic view is
displayed.
Fig.
68
Programm-
ing using
the bus
1. Create the new project on a PC.
2. Connect the computer with the bus via an
RS 232 or a USB interface.
3: Press the "
KNX
Programming Mode" button
and enable it.
KNX
KNX
Fig.
69
4. Start programming from the PC.
This process may take several hours.
Содержание Controlpanel
Страница 2: ......
Страница 7: ...GER 7 4 Geräteansicht 1 Display 320 x 240 Bildpunkte 2 MMC SD Kartenleser Fig 1 ...
Страница 46: ......
Страница 51: ...ENG 7 4 Unit view 1 Display 320 x 240 pixels 2 MMC SD card reader Fig 1 ...