ABB Conceptpower DPA 500 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 81

background image

04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx

Page 38/78 ABB

Modifications reserved

Defining the UPS positioning in a system:

The position of each UPS within a system has to be configured not only in the graphical interface but also in the
hardware. The position is determined as one of the following:

•

“First” UPS in the parallel configuration

•

“Middle” UPS in the parallel configuration (there may be more than one)

•

“Last” UPS in the parallel configuration. The maximum number of parallel cabinets is six (6). The maximum
number of parallel modules is thirty (30).

In a multi-cabinet configuration chain, the cabinet is seen as “First” and “Last” in an imaginary chain.
Configure the DIP switch for the existing system. For more details concerning the positions of this DIP switch, refer
to

Chapter 6.2.3.

6.4.5

Mimic Diagram – system level

The mimic diagram is the default screen. It shows the power flow through the UPS system (single frame as well as
multi-cabinet configuration) and indicates its status. This diagram can be accessed from any screen using the
corresponding icon in the display header.

Figure 19: Mimic Diagram Screen - system level

The color of each block identify its functional status. There are four main colors in the mimic diagram:

• Green: In operation
• White: Inactive block
• Yellow: Warning condition
• Red: Fault condition

Device

Color meaning

Rectifier

Green: Rectifier is on.
Red:

Rectifier is switched off.

Inverter

Green: Load is on inverter.
Red:

Inverter is switched off.

Bypass

Green: Load is on bypass or eco-mode
White: Bypass is switched off.

Battery

Green: Battery is charging or discharging.
Yellow:: Battery is not charging nor discharging.
Red:

Battery is in fault condition or is discharged.

Arrows indicate if battery is charging or discharging.

Maintenance Bypass IA1

Yellow: Load is on maintenance bypass
White: Maintenance bypass opened

Output Breaker IA2

Green: Parallel- Output breaker is closed (Position ON)

(Default condition with single UPS)

White: Parallel- Output breaker is opened (Position OFF)

«
...
36
37
38
39
40
...
»

Содержание Conceptpower DPA 500


















































































Отзывы:

Нет отзывов

Похожие инструкции для Conceptpower DPA 500

Бренд: G-Tec Страницы: 57

BlueBolt F1500-UPS

Бренд: Furman Страницы: 60

Inverterz Magic 12V 700VA

Бренд: Exide Страницы: 12

NEWTECH PRO II X9

Бренд: Tuncmatik Страницы: 23

Бренд: Chloride Страницы: 52

Бренд: MetaSystem Страницы: 36

Бренд: FSP Technology Страницы: 39

High-Frequency Online UPS DS1000E

Бренд: OPTI-UPS Страницы: 34

Бренд: Xtreme Power Conversion Страницы: 8

Бренд: Ablerex Страницы: 29

DRAGON POWER PLUS 15

Бренд: LBS Страницы: 67

DPA Upscale RI Series

Бренд: ABB Страницы: 133

Бренд: Xmart Страницы: 41

Бренд: Sola Страницы: 26

Бренд: PowerShield Страницы: 2

Бренд: PowerShield Страницы: 24

Бренд: CyberPower Страницы: 2

STANDBY UPS Series

Бренд: CyberPower Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды